Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Hydrocoat Antifouling Paint, Blue, Quart by Pettit Paint | For Boats | Boat Maintenance at West Marine
This product ad may change over time
ShareHydrocoat Antifouling Paint, Blue, Quart by Pettit Paint | For Boats | Boat Maintenance at West Marine
Hydrocoat Antifouling Paint, Blue, Quart by Pettit Paint | For Boats | Boat Maintenance at West Marine. Hydrocoats environmentally-friendly, water-based formula offers exceptional protection against all types of marine fouling organisms. Lacking the noxious solvents found in most bottom paints, Hydrocoat easier to apply and clean up, with no hea…
Hydrocoat Antifouling Paint, Blue, Quart by Pettit Paint | For Boats | Boat Maintenance at West Marine. Hydrocoats environmentally-friendly, water-based formula offers exceptional protection against all types of marine fouling organisms. Lacking the noxious solvents found in most bottom paints, Hydrocoat easier to apply and clean up, with no heavy solvent smell. It is also easy on the environment-and easy on the person who applies it. The water-based formula exceeds even the most stringent air pollution standards for VOCs. Hydrocoats ablative surface wears away with use, exposing fresh biocides while minimizing paint build-up and the need for sanding when the time comes to repaint. Hydrocoat withstands frequent trailering, beaching, and launching. And with a formula that allows unlimited dry time to launch, you can paint in the fall and splash in the spring. Key Features Offers outstanding protection against all types of marine fouling Contains drag reducing PTFE Finish can be burnished to reduce drag Allows unlimited dry time to launch Reduces the need for sanding at haulout Cleans up easily with soap and water Easy on the environment and the person who applies it Physical Data Vehicle type: Water-based Emulsion Finish: Flat Available colors: Blue, Green, Red, Black Components: 1 Curing mechanism: Solvent release Solids by weight: (Theoretical): 73 +/- 2% Solids by Volume: (Theoretical): 40 +/- 2% Coverage: 430sq.ft. /gal. VOC: 150 grams/liter (Max) Active ingredients: 40.43% Cuprous oxide Flash point: None Application Application Method: Brush, roller, airless, or conventional spray Number of coats recommended: 2 Minimum with additional coats at waterline recommended. Dry Film Thickness: 1.5 mils (3.75 wet mils) Applicator: High-quality short nap roller (maximum 3/16 nap) Application temperature: Min. /Max. Range: 50 F. Min/90F. Max Thinner: Water Drying Times* Drying @50F @70F @90F To touch 1 hr. 1/2 hr. 1/4 hr. To recoat 6 hr. 3 hr. 1 1/2 hr. To launch 48 hr. 16 hr. 12 hr. *The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching. Get the right amount of paint: Boat Type Bottom Paint 10' Dinghy 1 qt. 14' Outboard 1-2 qt. 18' Runabout 2 qt. 20' Sailboat 3 qt. 24' Runabout 3-4 qt. 30' Sailboat 1.5 gal. 32' Cruiser 1.5-2 gal. 36' Auxiliary 2 gal. 40' Cruiser 2.5 gal. 45' Sailboat 3-3.5 gal 50' Sportfisher 4+ gal. Another way to determine bottom paint quantity is to estimate the approximate surface area of the hull below the waterline, using the following formula: Length x Beam x .75 = Approximate underwater surface area in square feet. Each paint has a theoretical coverage area, but most paints require at least two coats, so you can expect actual coverage to be no greater than half of the theoretical value. To view available colors and for detailed application instructions, see the Hydrocoat Data Sheet. NOTE: For various reasons, antifouling paint formulas can change over time. The linked data sheet is believed to be accurate at the time of publication.
Description
Hydrocoat Antifouling Paint, Blue, Quart by Pettit Paint | For Boats | Boat Maintenance at West Marine. Hydrocoats environmentally-friendly, water-based formula offers exceptional protection against all types of marine fouling organisms. Lacking the noxious solvents found in most bottom paints, Hydrocoat easier to apply and clean up, with no heavy solvent smell. It is also easy on the environment-and easy on the person who applies it. The water-based formula exceeds even the most stringent air pollution standards for VOCs. Hydrocoats ablative surface wears away with use, exposing fresh biocides while minimizing paint build-up and the need for sanding when the time comes to repaint. Hydrocoat withstands frequent trailering, beaching, and launching. And with a formula that allows unlimited dry time to launch, you can paint in the fall and splash in the spring. Key Features Offers outstanding protection against all types of marine fouling Contains drag reducing PTFE Finish can be burnished to reduce drag Allows unlimited dry time to launch Reduces the need for sanding at haulout Cleans up easily with soap and water Easy on the environment and the person who applies it Physical Data Vehicle type: Water-based Emulsion Finish: Flat Available colors: Blue, Green, Red, Black Components: 1 Curing mechanism: Solvent release Solids by weight: (Theoretical): 73 +/- 2% Solids by Volume: (Theoretical): 40 +/- 2% Coverage: 430sq.ft. /gal. VOC: 150 grams/liter (Max) Active ingredients: 40.43% Cuprous oxide Flash point: None Application Application Method: Brush, roller, airless, or conventional spray Number of coats recommended: 2 Minimum with additional coats at waterline recommended. Dry Film Thickness: 1.5 mils (3.75 wet mils) Applicator: High-quality short nap roller (maximum 3/16 nap) Application temperature: Min. /Max. Range: 50 F. Min/90F. Max Thinner: Water Drying Times* Drying @50F @70F @90F To touch 1 hr. 1/2 hr. 1/4 hr. To recoat 6 hr. 3 hr. 1 1/2 hr. To launch 48 hr. 16 hr. 12 hr. *The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching. Get the right amount of paint: Boat Type Bottom Paint 10' Dinghy 1 qt. 14' Outboard 1-2 qt. 18' Runabout 2 qt. 20' Sailboat 3 qt. 24' Runabout 3-4 qt. 30' Sailboat 1.5 gal. 32' Cruiser 1.5-2 gal. 36' Auxiliary 2 gal. 40' Cruiser 2.5 gal. 45' Sailboat 3-3.5 gal 50' Sportfisher 4+ gal. Another way to determine bottom paint quantity is to estimate the approximate surface area of the hull below the waterline, using the following formula: Length x Beam x .75 = Approximate underwater surface area in square feet. Each paint has a theoretical coverage area, but most paints require at least two coats, so you can expect actual coverage to be no greater than half of the theoretical value. To view available colors and for detailed application instructions, see the Hydrocoat Data Sheet. NOTE: For various reasons, antifouling paint formulas can change over time. The linked data sheet is believed to be accurate at the time of publication.